14
Practical Example
Enter “Workstation 234” as Scale ID; Display and Print Other User Data
Step Key (or instruction) Display/Output
1. Select Setup menu, then Input; see Preparation
Display scale workstation ID (in
this example: no ID number exists)
2. Enter the first letter of the scale a 13th through 20th digits of ID displayed
workstation ID
3. Set the letter “W” y repeatedly, until the W
appears in the middle
4. Enter the next letter of the scale a
workstation ID
5. Select the letter “o” Y repeatedly
6. Repeat steps 4 and 5 with a x X
the appropriate letters (display
“longer” values: see “Data Output
Functions” on page 52)
7. Store scale workstation ID ID soft key (X)
8. Display the 5th through 12th digits Y
of the scale workstation ID
IDz(- a -)b
To Next Page
Loading...
