Sartorius FB - Page 34

34
Additional Functions
In addition to the functions for:
– alphanumeric input,
– taring
(not during alphanumeric input),
– printing,
you can also access the following
functions from this application:
– calibration
(not for alphanumeric input),
– setup,
– turning off the scale
Calibration/Adjustment
● Press [ISOTEST]/[TEST]
> See “Calibration/Adjustment”
for further instructions
Setup (setting parameters)
● Press M
> See “Configuring the Scale” for
further instructions
Turning Off the Scale
● Press e/[ON/OFF]
> The balance shuts off
> The display goes blank
Practical Example
Toggle the Display From Grams [g] (1st Unit) to Pound [lb] (2nd Unit)
Step Key (or instruction) Display/Output
(R1: weight unit 1)
1. Toggle to Pound [lb] lb soft key
(R2: weight unit 2) v/[FUNCTION]
2. Toggle to grams [g] g soft key v/[FUNCTION]