43
Operating the Scale
Practical Example
Weighing in Several Components
(Parameter setting: Net-total application program 2 1 6; print all parameters 7 1 2)
Step Key (or instruction) Display/Output
1. Select the net-total application see “Preparation”
in the Setup menu
2. Prepare a container for the Place the empty container
components on the scale
3. Tare the scale t
4. Add first component Place the first component
in the container
5. Store component value 1. comp soft key
v/[FUNCTION]
6. Add next component Place next component
in the container
7. Store component value 2. comp soft key
v/[FUNCTION]
8. If desired, add further Repeat steps 6 and 7
components as needed
9. Display total weight w/[TOGGLE]
Comp1 + 952.48 g
Comp1 + 952.48 g
Comp2 + 2837.12 g
To Next Page
Loading...
