89
* CD = Council Directive 90/384/EEC on non-automatic weighing instruments used within the European Economic Area
Models Verified* by the Manufacturer and with EC Type Approval
General Specifications:
Power requirements, voltage 230 V or 115 V via AC adapter, +15% ... – 20%
Frequency 48 – 60 Hz
Range of use (temperature) +10 ... +30 °C
Adaptation to ambient conditions and
application requirements By selection of 1 of 4 optimized filter levels
Display update
(depends on the filter level selected) 0.1 – 0. 4
Power consumption 16 VA maximum; 9 VA average
Hours of operation with external rechargeable
battery pack, YRB06Z,
when fully charged, approx. 14 h
Selectable application programs Mass unit conversion (toggling), counting, weighing in percent, net-total formulation,
animal weighing, checkweighing
Built-in interface RS-232C
Format: 7-bit ASCII, 1 start bit, 1 or 2 stop bits
Parity: Odd, even or space
Transmission rates: 150 to 19,200 baud
Handshake: Software or hardware
Specifications for the Particular Models:
Model FB06BBE-S0CE FB6CCE-H0CE FB2CCE-S0CE
Type designation isoTEST in conjunction with BD BF
Accuracy class * KKK
Scale interval, d* g 0.001 0.01 0.01
Maximum capacity, Max* g 620 6,200 2,200
Verification scale interval, e* g 0.01 0.1 0.1
Minimum capacity, Min* g 0.02 0.5 0.5
Max. overload capacity kg 3 25 10
Tare-balancing range (subtractive) ≤100% of the maximum weighing range
Preload that can be electronically g 93 – 110
compensated for (without restricting
the weighing capacity)
Max. preload at the beginning g 110 5,200 1,300
of calibration/adjustment
(scale display must be zeroed)
Application range acc. to CD* g 0.02 – 620 0.5 – 6,200 0.5 – 2,200
Selectable weight units g, kg g, kg g, kg
Response time (average) s 1.5 1.5 1.5
Load plate size mm Ø 130 218 x 200 218 x 200
Platform dimensions (W x D x H) mm 240x294x86 240x294x86 240x294x86
Net weight, approx. kg 6.2 8.7 7.6
Dust and water protection rating of the
scale housing acc. to EN 60529 IP54
Overview
To Next Page
Loading...
