Sartorius LMA200PM - Page 12

Example: Defining a new user (Name: Jones) and access controls for the “Supervisor” user group
Prerequisite: Administrator rights
Step Key (or instruction) Display/output
1. Open the Setup menu Tap the Setup line With: administrator rights:
Manage programs
Evaluation of results
Configuration
Calibration
Security management
Info
2. Open the User Name input window Select the following menu items:
Security management
Modify user data
Configure new user
3. Enter the new user name and Tap the required letters, numbers, or User Jones
confirm your input special characters (in this example: Jones) Group Operator
and press the
key PIN *
4. Select the “Supervisor” group Tap the
button Group Supervisor
and press the
key
5. Open the “PIN” input window Tap the
button
and press the
key
6. Enter the PIN and confirm Tap your choice of 4 digits (in this example: 1234)
Press the
key
7. Enter the same PIN again 1234
and confirm and press the
key
8. Exit this menu level Press the
key Save changes? Yes/No
9. Save changes Tap the Yes button
10. Select “Access control, supervisor” Tap the
button
(settings are applied to all “Supervisors” and press the
key
11. Define the desired access rights Tap the
or buttons as needed
and switch rights on or off and press the
key
12. Save changes Press the
key
Tap the Yes button
13. Close the Setup menu Press the
key 3 times
12