Sartorius LMA200PM - Configuration

Purpose
You can configure your LMA200PM
moisture analyzer to meet individual
requirements by entering user data and
setting selected menu parameters in the
Setup menu.
With the default settings, parts of the
Setup menu are accessible only to cer-
tain user groups, as indicated in paren-
theses in the following list.
11
Configuration
The Setup menu is divided into the
following sections:
– Manage programs
(administrators, supervisors)
– Evaluation of results
– Configuration
(administrators, supervisors)
– Calibration
(administrators)
– Security management
(administrator rights)
– Info
Setting the Language
You can choose from 5 languages for
printouts and display:
– English
– German
– French
– Italian
– Spanish
Example: Changing the language setting
Prerequisite: Administrator or supervisor rights
Step Key (or instruction) Display/output
1. Login as administrator Tap the Login button First login:
Admin Administrator ****
Subsequent login: list of all users
Tap the First login:
“Administrator” line Admin: PIN **********
Subsequent login:
[Name]: PIN **********
Tap the [name] PIN line
Enter your PIN. First login: 9999
Press
to confirm
2. Select the Setup menu Tap the Setup line With administrator rights:
Manage programs
Evaluation of results
Configuration
Calibration
Security management
Info
With supervisor rights
(applies only if privileges have not
been changed):
Manage programs
Evaluation of results
Configuration
Info
3. Open the list of language options Tap the Configuration menu item
Tap the Device menu item
Tap the Operating parameters line Setup/Configuration/Device/
Operation
Operating language English
4. Select the desired language Tap the Operating language line repeatedly
until the desired language
is shown (in this example, German) Bediensprache Deutsch
5. Exit the Operating Parameters menu Press the
key
6. Edit other settings Tap the Yes (or Ja) button
in the message window
7. Close the Setup menu Press the
key 3 times