Sartorius Sartocheck 3 plus - Test Execution Setup; Record Data Entry and Starting Tests

25
Entry of record data 2
Filter line: Name of filter line
Housing: Type of housing
Wetting medium: Type of wetting medium
Test gas: Type of test gas
Water quality: Data on water quality
Comment: Name of operational process
Comment 2: Enter test-relevant remarks
Comment 3: Enter test-relevant remarks
Start the Test Program
Save:
After confirmation, the data are saved
The menu “Test program: Start” lists the options for that test start.
Once the programming is finished, the test can be started.
(Pressing “Page Down”)
Fig. 7-11 | Test program: Record data 2
Fig. 7-12 | Test program: Start