Sartorius Sartocheck 3 plus - Service Operations (Continued); Data Logging Options and Management Unit Parameters

40
Management Unit Parameters
In the submenu “Management Unit Parameters”, you can set the following options:
F3: Edit parameters
Edits the management unit software parameters
F4: Save parameters to SD card
The file “Software configuration management unit parameters”
is saved to an SD card.
F5: Load parameters from SD card
The file “Software configuration management unit parameters”
is loaded from an SD card.
F6: Print parameters
Prints the parameters of the management unit software
F7: Set standard parameters
Sets back the factory default parameters
Fig. 7-58 | Service Menu:
Software configuration
Fig. 7-59 | Service Menu:
Software configuration