41
Edit Parameters
F1: Password
You can activate|deactivate the password’s validity. When the password
expiration date is activated, the password must be renewed after the pass-
word expiration date. Minimum duration is 1 day and a maximum 366 days.
After the password expiration date has expired, you will automatically be
prompted to renew the password.
F2: Test program
Automatic Test Time Mode can shorten the test time if the values are
constant within a defined tolerance. When the automatic test time mode is
deactivated, the test time is used that is set during the programming of the
test program.
F3: Hardware
The internal printer can be turned ON|OFF.
F4: Auto Log Off
To activate|deactivate the auto log off and to define the timeout
Fig. 7-60 | Service Menu:
Software configuration
Fig. 7-61 | Service Menu:
Software configuration
To Next Page
Loading...