Sartorius Secura 224-1S - Page 100

120 pages

To Next Page

To Previous Page

100

Care and Maintenance

User Manual Secura

, Quintix

, Practum

7) Pull out the draft shield frame from the side of the guide

and remove the draft shield frame by pulling up.

8) Pull out the front and rear glass panels (upwards).

Main Page

Table of Contents3
User Information4
Warning/Danger Symbols4
Symbols4
Application Advice/Technical Support5
Safety Information6
Guidelines and General Information6
Installation Information6
Intended Use7
General View of the Equipment8
Getting Started9
Unpacking and Equipment Supplied9
Installing the Balance10
Choosing a Location12
Moving the Balance13
Power Connection (Power Supply)14
Warm-Up Time15
Switching on the Balance16
Startup Wizard16
Below-Balance Weighing18
Anti-Theft Locking Device19
Using the Balance20
Switching the Balance On/Off (Standby)20
Leveling21
Leveling with Electronic Level Indicator (Secura ® )21
Leveling with a Conventional Level Indicator22
And Practum22
Operating Concept23
Operating and Display Elements on the Display23
The Menu24
Enter Figures on the Keypad25
Text and Character Input (Secura Only)25
Accessing an Application in the Menu26
List of Applications in the Menu26
System Settings (Setup Menu)28
Accessing the Menu and Changing Settings28
List of Available Settings29
Language29
Date and Time (Secura and Quintix Only)30
Device Information31
Calibration/Adjustment31
Weighing31
Printout34
Identifier35
Identifier (Secura Only)35
USB Port36
Display Brightness38
Acoustic Signal38
More Settings39
Weighing41
Mass Unit Conversion42
Sqmin Minimum Weighing (Secura Only)44
Individual Identifiers (Secura Only)45
Mixing (Secura and Quintix Only)46
Statistics (Secura and Quintix Only)49
Totalizing Components (Secura and Quintix Only)52
Density55
Percentage59
Conversion (Secura and Quintix Only)62
Unstable Condition64
Checkweighing66
Peak Hold68
Counting70
Calibration and Adjustment73
Calibration/Adjustment/Adjustment Using an Internal Calibration/Adjustment Weight (Secura and Quintix Only)74
Calibration/Adjustment Using an External Calibration Weight75
Automatic Calibration/Adjustment with Isocal76
ISO/GLP-Compliant Printout77
Characteristics77
Configuration77
Operation77
USB Port79
Communication with Peripheral Devices79
Direct Transfer of Data (PC)80
Interface Specification86
Data Output86
Data Output Formats86
Data Output Format with 22 Characters88
Data Input89
Overview of Interface Commands (Commands)90
Status Messages91
Key Fadeout91
Error Messages in Applications91
Transporting the Balance93
Care and Maintenance96
Service96
Cleaning the Balance96
Disposal102
Specifications103
General Data103
Model-Specific Data105
Verified Models with Country-Specific Type Approval Certificate107
Accessories110
Balance Dimensions111
Appendix116

Sartorius Secura 224-1S - Page 100

Table of Contents

Related product manuals