97
Care and Maintenance
User Manual Secura
®
, Quintix
®
, Practum
®
Cleaning the Balance Housing
t Disconnect from the supply voltage: Disconnect the device from the power supply.
If necessary, disconnect the data cable from the balance.
Never open the balance or the AC adaptor.
The parts contained in these cannot be cleaned, repaired, or replaced by the operator.
– Make sure that no liquid or dust gets into the balance or the AC adaptor.
– Remove the base plate, pan support, and weighing pan from the draft shield.
– Never use cleaning agents that contain solvents or abrasive ingredients which
may ultimately damage the equipment.
Secura
®
and Quintix
®
Models:
t The plastic top and bottom parts of the balance housing are coated with a special
substance that allows these parts to be cleaned using acetone.
Do not clean the following parts with acetone or aggressive cleaning agents:
control panel, mains plug, data interface, labels, verified seal, or any other plastic
parts.
t Wipe the balance with a soft, dry cloth after cleaning.
Contaminated Equipment:
– Health risks from product contamination due to product deposits and the
collection of residue with microbial contaminations.
– Health risk from biological or microbiological substances.
– Observe cleaning specifications.
– Examine the cleaning results closely.
To Next Page
Loading...
