7
!
Always lock after setting the volume
5.2 Attaching and Ejecting Tips
The pipette has a spring-loaded tip cones for optimal sealing.
To attach a tip:
1. Make sure the pipette tip cones are clean and undamaged.
2. Press the tip cone carefully into a tip held in a tip tray.
If the volume is unlocked (the red bar is visible):
1. Turn the operating button to adjust the volume.
2. Slide the volume lock button down. Volume adjustment is now locked, preventing accidental volume changes.
NOTE: If the volume lock is not used, volume can be accidentally changed.
To Next Page
Loading...
Need help?
General
