SATO CL412e - Troubleshooting Tables

Page 8-11
Section 8. Troubleshooting
SATO CL408e/CL412e Service Manual
PN 9001078
Rev. A
8.8 Troubleshooting Tables
The troubleshooting table below includes the following general symptoms descriptions:
Print Quality Problems
• Image Voids • No Ribbon Movement • POWER LED not on
• Ribbon Wrinkle • No Label Movement • ERROR LED on
• Light Images • No Printed Image • ON LINE LED not on
• Smearing • Display Problem • No Label Drive
motmySesuaCelbaborPnoitcAevitcerroCdetsegguS
sdioVegamIslebalytilauqrooPkcotselbitapmocrefsnartlamrehtesU
snobbirytilauqrooPsnobbirOTASeniunegesU
kcotslebalotdehctamtonnobbiRsreilppusaidemhtiwkcehC
scinortceledegamaD)2.6.ceS(draobtiucricecalpeR
netalpdegamaDnetalpecalpeR
nobbiR
elknirW
tnemngiladaehrooP
)6.5.ceS(ecnalabdaehtsujdA
rellornobbirtsujdA
tnemngiladaehtsujdA
noisnetnobbirrooP)2.5.ceS(noisnetnobbirtsujdA
netalpnroW)8.6.ceS(netalpecalpeR
netalp/daehnolairetamngieroFnetalpdnadaehnaelC
slebalnolairetamngieroFkcotslebalytilauqhgihesU
daehtnirpdegamaD)7.6.ceS(daehtnirpecalpeR
segamIthgiLslebalytilauqrooPkcotselbitapmocrefsnartlamrehtesU
snobbirytilauqrooPsnobbirOTASeniunegesU
ssenkrad/ygrenedaehtnirpwoL
lortnocssenkradtsujdA
)launaMrotarepOeeS(