SATO CL412e - Replacing the Timing Belts

Page 6-13
Section 6. Replacement Procedures
SATO CL408e/CL412e Service Manual
PN 9001078
Rev. A
Replacing the Timing Belts
CENTER SCREW
REWIND SPINDLE
SPRING
LOADED IDLER
BELT "A"
BELT "B"
MOTOR
TO FRONT
PLATEN
GEAR
BELT "B"
BELT "A"
SLIDE BELT FROM PULLEY WHILE
PULLING THE REWIND SPINDLE
BACK FROM THE FRAME
Fig. 6-13
REMOVE CENTER
SCREW
USE WRENCH TO
PREVENT SHAFT FROM
SLIPPING