SATO CL612e - Page 183

Page 9-11
Section 9. Optional Accessories
SATO CL608e/CL612e Service Manual
PN 9001079
Rev. B
Label Dispenser Installation
PLACE SPRING ON PIN
(BOTH ENDS) AND
ATTACH ROLLER WITH
FLAT AREA OF SHAFT
OVER SPRING AND INTO
HOLE (BOTH ENDS)
Figs. 9-12
INSTALL DISPENSER
FEED ROLLER FROM THIS
END IN SPACE VACATED
BY MOTOR
PLACE BEARING IN
RIGHT SIDE FRAME.
SLIDE ROLLER SHAFT
INTO POSITION
Figs. 9-13