SATO CL612e - Replacing the Platen

Page 6-20
Section 6. Replacement Procedures
SATO CL608e/CL612e Service Manual
PN 9001079
Rev. B
Fig. 6-30
REMOVE THE
RIBBON AND
LABEL STOCK
Fig. 6-31
Fig. 6-32
Replacing the Platen
PLATEN
LOOSEN CLAMP
AND SCREW
HOLDING PLATEN
TO FRAME
SLIGHTLY LOOSEN
ECCENTRIC SCREW
REMOVE BELT
LOOSEN IDLER SCREWS
TO RELEASE BELT
TENSION