Page 9-14
Section 9. Optional Accessories
SATO CL608e/CL612e Service Manual
PN 9001079
Rev.B
Label Dispenser Installation
Figs. 9-19
(Ref. Fig. 9-8h)
ROUTE CABLE FROM DISPENSER UNIT UNDER
STAY AND THROUGH OPENING IN PRINTER TO
THE MAIN PCB CONNECTOR HARNESS @ SEN3
Figs. 9-18
SECURE DISPENSER
UNIT TO PRINTER WITH
SCREWS AT (5) PLACES
DISPENSER
UNIT IN OPEN
POSITION
FRONT OF THE
PRINTER
FRONT OF
PRINTER
LOOKING
DOWN
ATTACH CABLE STAY IN THIS
APPROXIMATE POSITION.
To Next Page
Loading...
