What does it mean when the ERROR LED is on for SATO printer?
If the ERROR LED is on for your SATO printer, it could be because the head is not locked. Ensure that you close and latch the head release.
How to fix SATO M-84PRO Printer not responding to data sent from PC with error message?
If your SATO printer is not responding to data sent from the PC, and there is an error message, verify that: * Both ends of the cable are securely inserted into their respective connectors. * The printer is ONLINE. * The cable is not defective.
General| Print Technology | Thermal Transfer / Direct Thermal |
|---|---|
| Print Resolution | 203 dpi |
| Maximum Print Width | 104 mm |
| Weight | 2.5 kg |
| Media Width | 25.4 mm - 110 mm |
| Connectivity | USB, Serial, Ethernet |
| Memory | 8 MB DRAM, 4 MB Flash |
| Supported Barcode Types | Code 39, Code 128, UPC-A, UPC-E, EAN-8, EAN-13, ITF, Codabar, PDF417, Data Matrix, QR Code |
| Supported Media Types | Labels, Tags, Paper |
| Media Thickness | 0.06 mm - 0.25 mm |
| Power Requirements | 100-240 VAC, 50/60 Hz |
Overview of the SATO M-84PRO Thermal Transfer Printer, its features, and capabilities.
Detailed specifications for M-84PRO models, including print speed, resolution, media, and ribbon.
Details on the printer's front panel controls, LEDs, and LCD display.
Explains adjustments for print darkness, offset, pitch, and display contrast.
Lists available interface types like Parallel, Serial, USB, and Ethernet.
Describes the various matrix, auto-smoothing, vector, and raster fonts supported.
Lists supported linear and two-dimensional bar code symbologies and features.
Provides physical dimensions and weight of the printer.
Details input voltage, power consumption, and environmental operating conditions.
Specifies operating and storage temperature and humidity ranges.
Lists safety and RFI/EMI certifications for the printer.
Guide to installing the SATO M-84PRO printers and getting started quickly.
Instructions for safely unpacking the printer and identifying its components.
Guidance on selecting a location and setting up the printer for operation.
Step-by-step instructions for loading various types of labels and tags into the printer.
Detailed procedure for loading the ribbon correctly into the printer.
Description of the printer's front panel controls, LEDs, potentiometers, and LCD display.
Identifies connectors and slots on the rear of the printer, including AC input and interface slots.
Explains the function of the Ribbon End, Head Open, and Label Indexing sensors.
Details on setting printer parameters using DIP switches.
Describes default switch and software settings for the printer.
Guides for adjusting pitch and backfeed offset using potentiometers.
Instructions for configuring printer settings via the LCD panel interface.
Overview of cleaning procedures and maintenance tasks for the printer.
How to adjust print darkness and speed for optimal print quality.
Procedure for cleaning critical printer components like the print head and rollers.
Instructions for cleaning the transmissive and reflective label edge sensors.
Step-by-step guide for user-replaceable print head removal and installation.
Basic checks to perform before troubleshooting printer issues.
Troubleshooting steps for issues related to the IEEE1284 parallel connection.
Troubleshooting steps for problems with the RS232C serial interface.
Steps to verify driver installation and troubleshoot USB connection issues.
Troubleshooting for printer connectivity and printing issues over a LAN.
Explanation of LED indicators, LCD messages, and audible beeps for error conditions.
Overview of printer interface modules and host system connectivity.
Description of available interfaces: Parallel, Serial, USB, Ethernet.
Explanation of single job and multi-job receive buffer configurations.
Technical details and specifications for the IEEE1284 parallel interface.
General and electrical specifications for the RS232 serial interface.
Specifications for the USB interface, including connectors and host requirements.
Specifications for the LAN interface, including cable and connector details.
Explanation of two-way communication protocols for checking printer status.
Details on PCMCIA memory card types, specifications, and error handling.
Procedure for replacing user-changeable plug-in interface modules.
Setup and operation for the optional label cutter accessory.
Setup and operation for the label dispense option for demand-mode printing.
Installation and operation instructions for the label rewinder accessory.
Information on the optional real-time clock for date/time maintenance.
To Next Page
