SATO /s8408 - Interface Modules; Regulatory Approvals; Print; Media

Unit 2: Technical Data
S8400 Series Operator Manual
2-3 PN: 9001160 (C)
INTERFACE MODULES
REGULATORY APPROVALS
PRINT
MEDIA
INTERFACE MODULES
Enhanced Parallel Port IEEE1284 (ECP Compatible)
Serial Port
RS232C (9600 to 57,600 bps) - 25 Pin
RS422/485 (9600 to 57600 bps)
Universal Serial Bus (USB) USB Version 1.1
Local Area Network (LAN) 10BASE-T/100BASE-TX Automatic Switching
Wireless LAN IEEE802.11b/g Wireless
REGULATORY
Safety MET, NEMKO-GS, C-MET
Radiant Noise VCCI (Class B), FCC (Class B), EN 55022 (Class B)
Packaging Drop Test ISTA-2A
PRINT
Method Direct Thermal / Thermal Transfer
Head Width 4.09 Inches (104mm)
Maximum Speed
S8408: 4 to 16 Inches Per Second (102-406mm/s)
S8412: 4 to 14 Inches Per Second (102-356mm/s)
S8424: 2 to 6 Inches Per Second (51-152mm/s)
Resolution
S8408: 203 Dots Per Inch (8 dots/mm)
S8412: 305 Dots Per Inch (12 dots/mm)
S8424: 609 Dots Per Inch (24dots/mm)
Maximum Printable Area
S8408: 4.09 Inches W x 98.4 Inches L (104mm W x 2500mm L).
S8412: 4.09 Inches W x 59.0 Inches L (104mm W x 1500mm L)
S8424: 4.09 Inches W x 15.7 Inches L (104mm W x 400mm L)
MEDIA
Width
0.394 to 5.039 Inches (10-128 mm)
Media Width with liner: 0.5 to 5.1 Inches (13-131 mm)
Length (Pitch) Media Length: 0.6 Inches (15 mm) (to printable area)
Type Die-Cut Labels, Waste removed, Roll, 0.125 inch Gap or I-Mark
Thickness 0.002 to 0.012 Inches (0.05 - 0.31mm)