3 Printer operation Self test
21
3.2 Self test
The printer can run a self test to print a configuration label, which helps you
understand current settings of the printer.
1. Turn off the printer.
2. Press and hold the FEED button, and turn on the printer.
3. Both status lights glow solid Orange for a few seconds. Next, they turn to
green shortly, and then turn to other colors. When LED 2 turns to green
and LED 1 turns to Orange, release the FEED button.
4. Press the FEED button to print a configuration label.
Your configuration label should look like this:
To Next Page
Loading...
