3 Printer operation Self test
28
Option Parts
If your printer has a Wi-Fi module, your SZPL configuration label will contain
the following entries:
FW Version
Display WLAN board firmware version.
Date
Display WLAN board firmware version date.
IP Address
Display the IP address of your printer. When DHCP is enabled, it shows the
automatically assigned IP address; when DHCP is disabled, it shows the
manually specified IP address.
Subnet mask
Display the current IPv4 subnet mask of your printer in Wi-Fi module.
Gateway
Display the gateway of your printer. When DHCP is enabled, it shows the
automatically assigned gateway; when DHCP is disabled, it shows the
manually specified gateway.
Mac address
The unique address assigned to your printer that connects to the internet.
DHCP
When DHCP is enabled, it assigns an IP address to your printer
automatically.
DHCP Hostname
Display the name of a DHCP client in Wi-Fi module.
Socket Port
Display the socket number of the printer in Wi-Fi module.
SSID
Short for service set identifier. It is the name of a wireless local area
network.
Mode
There are ad-hoc and infrastructure mode. Refer to Print Tool Network type
description from Technical manual.
Country Code
To Next Page
Loading...
