SATO WS208 - 3.4 Communications

3 Printer operation Communications
33
3.4 Communications
3.4.1 Interfaces and Requirements
This printer comes with USB type A and type B interface, an ethernet.
 USB Interface Requirements
The Universal Serial Bus (USB) interface is compatible with your existing PC hardware.
The USB’s “plug and play” design makes installation easy. Multiple printers can share
a single USB port/hub. The different usage of type A and B are as below.
USB type A
USB Flash drive, USB keyboard or USB Scanner.
USB type B
PC to set printer.
 Ethernet Module Status Indicators
The indicators with two different colors help users understand status of Ethernet:
LED
Status
Description
Both Off
No Ethernet link detected.
Blinking
The printer waits for printer ready.
It will take about few seconds to be ready.
Green
Speed LED
On: 100 Mbps link
Off: 10 Mbps link
Orange
Link/Activity LED
On: link up
Off: link down
Blinking: activity