3 Printer Operation Self-Test
33
3.2 Self-Test
The printer can run a self-test to print a configuration label, which helps you
understand current settings of the printer.
Perform the following steps to run the self-test:
1. Turn off the printer.
2. Press and hold the FEED button and turn on the printer.
3. Both status lights glow solid orange for a few seconds. Next, they turn to
green shortly and then turn to other colors. When LED 1 turns to orange
and LED 2 turns to green, release the FEED button.
4. Press the FEED button to print a configuration label.
To Next Page
Loading...
