6 SATO WS4 Printer Utility Work with SATO WS4 Printer Utility
72
∙ If you don’t have a static IP address, make sure DHCP is enabled and click
Send.
5. After your printer restarts, click Get to get the IPv4 information of your printer.
If you are using a static IP address, you’ll get the same settings as it is in the
previous step; if you are using DHCP, the DHCP server will automatically
populate the IP Address, Subnet Mask and Gateway boxes under Current IPv4.
6. In the Input/Output Port list, click LAN, and click Setting.
7. In the Setting LAN dialog box, do one of the following to configure your IP
To Next Page
Loading...
