SATO WS412DT - Status3; Return Sequence

13
3.6 STATUS3
This communication protocol returns the status corresponding to the request command from the host computer so
that the host computer can control printer status. For the details of request command and return status, refer to [3.3.1
Return Status in STATUS3 format] and [3.3.3 Other Return Statuses].
3.6.1 Return Sequence
When LAN interface is in use, refer to [7.8 Socket Connection] as well.
1) Normal process
Host
Printer
Print command
(
)
Receiving/Analysis/Editing
ENQ
(Status request command)
Print operation
Printing the 3
rd
label
Printing the 1
st
label
Printing the 2
nd
label
Paper end error occurred
Error release
(Press the FEED key)
Printing the 3
rd
label
～
～
Printing the 100
th
label
(Printer status: No error)
ACK
Status
～
～
～
～
ENQ
(Status request command)
(
)
(
Status
)
ENQ
(Status request command)
Status
(
)
ENQ
(Status request command)
Status
(
)
ENQ
(Status request command)
Status
(
)
Print command
(
)
(Printer status: No error)
ACK
Printing the 1
st
label
ENQ
(Status request command)
Status
(
)
Status
(
)
ENQ
(Status request command)
Receiving/Analysis
/Editing
ID No.=[Space]
Status=Wait to receive
Print qty.=[000000]
ID No.=[06]
Status=Printing
Print qty.=[000050]
ID No.=[05]
Print qty.=100
ID No=[05]
Status=Analyzing/Editing
Print qty.=[000000]
ID No.=[05]
Status=Printing
Print qty.=[000100]
ID No.=[06]
Print qty.=50
ID No.=[05]
Status=Paper end
Print qty.=[000098]
ID No.=[05]
Status=Printing
Print qty.=[000098]
ID No.=[05]
Status=Printing
Print qty.=[000001]