SATO WS412DT - Timing Chart of Multi Item Buffer

22
4.4.3 Timing Chart of Multi Item Buffer
1)Normal process
2) Cancel process
Printer side
RD
SD
Print(1)
Online
CAN
Receiving/Analysis/
Editing(2)
Print(2)
Printer status
Receiving/Analysis/Editing(1)
STX..ETX(1)
STX…ETX(2)
ENQ
ACK
ENQ
Status
ENQ
ACK
Status
ACK
Status
100ms
ENQ
Status
NOTE: To send the next data, wait more than 100ms as delay time after sending the cancel request.
Press FEED/LINE
Printer side
Printer status
Power ON
RD
SD
Initial
Receiving/Analysis/Editing(2)
Print(1)
Online
Receive buffer near full
occurred
Receive buffer near full
release
Offline
Print(3)
Press FEED/LINE
Receiving/Analysis/
Editing(1)
STX…ETX(1)
STX…ETX(3)
Receiving/Analysis/Editing(3)
ENQ
ACK
ENQ
Status
ENQ
ACK
Status
ENQ
Status
ACK
Status
NOTE: Avoid ENQ transmission (Status request) while sending the print data (STX…ETX).
This may cause return status error or print error.
ENQ
Status
STX…ETX(2)
Print(2)