SATO WS412DT - SNMP Specification (Simple Network Management Protocol); Supported MIB

38
6.8 SNMP Specification (Simple Network Management Protocol)
SNMP is a function to disclose the printer information to the IP network. It is possible to monitor the printer status via
network.
6.8.1 Supported MIB
The printer information is kept as a Management Information Base format called MIB. Each nodes on the tree
have numbers, and SNMP manager send a node number to the printer acquire information of the node as
information acquiring request. The printer returns the information of specified node number as response data.
MIBs that the printer supports are as follows;
・system(1)
・interface(2)
・address translation(3)
・ip(4)
・icmp(5)
・tcp(6)
・udn(7)
・transmisson(10)
・snmp(11)
・host(25)
・printerMIB(43)