SATO WS412DT - Page 45

41
Wireless LAN
specification
(1) Standard
IEEE802.1b/g/n
(2) Frequency band
2.4GHz
(3) Baud rate
Max. 11Mbps (Connected by IEEE802.11b)
Max. 54Mbps (Connected by IEEE802.11g)
Max. MCS7(*1) (Connected by IEEE802.11n)
(4) Wireless LAN communication mode
Infrastructure mode
Ad Hoc mode
*In IEEE802.11n, only Infrastructure mode is available.
(5) Channel
1 - 13 (when connected with IEEE802.11b/g/n)
*AP channel will be used in the Infrastructure mode.
*A channel of the other side will be used when the other side's status is waiting for
connection in the Ad Hoc mode.
*Setting range will be different depending on the regional setting.
Region
Setting range
USA/Canada
1 - 11
Europe/Malaysia/Singapore/Korea/China
1 - 13
*Regardless of the regional setting, when the band width of the IEEE802.11n is 40MHz, the
setting range will be 3 to 11 channel.
(6) SSID
Up to 32 alphanumeric characters and symbols (from 20H to 7EH) can be set.
(7) Authentication
Open System
Shared Key
WPA/WPA2
IEEE802.1x (EAP-TLS, LEAP, EAP-TTLS, EAP-PEAP, EAP-FAST are selectable.
Hereafter written as "EAP".) .
(8) Encryption scheme
None
WEP
TKIP
AES