SATO WS412DT - Page 9

5
2) Cancel request command
This command enables to cancel the print jobs and to clear the entire contents of receive buffer.
The printer status after completing this process is returned.
(1) Command CAN(HEX 18H)
(2) List of return status
Return status
Description
ACK(HEX 06H)
No error in the printer
NAK(HEX 15H)
Error in the printer
* Important
After sending the cancel request command, wait more than 100ms before sending the next data.
3) Print command
This command (STX ESC+“A”~ESC+“Z” ETX) starts the print operation.
The printer status after receiving this command is returned.
(1) List of return status
Return status
Description
ACK(HEX 06H)
No error in the printer
NAK(HEX 15H)
Error in the printer
Example of Job ID Number command
* Note
For the Job ID Number command, refer to the Command Specifications.
<A>
<ID>01
<V>100<H>100<P>2<L>0202<XM>ABC
<Q>1
<Z>