Saturn 2003 Ion User Manual

6. Locate the die mark on the outer lower surface of
the rear rail, rearward of the #5 bar.
Important: Do not section the rail in any area other
than the die mark location given.
7. Align a sliding square or similar tool to the line at
the tip of the arrow in the die mark. Scribe a line
across the rail.
8. Use the same tool to transfer this scribed line
onto the sides and the weld flanges of the rail.
876931
872755
872758
2003 Saturn Ion 3-151
2003 Saturn Ion

Saturn 2003 Ion Specifications

General

Brand	Saturn
Model	2003 Ion
Category	Automobile
Language	English