Saturn 2003 Ion User Manual

5. Install the AIR BAG fuse into the body control
module fuse center.
6. Install the body control module fuse center cover.
7. Use caution while reaching in and turn the
ignition switch to the ON position.
The AIR BAG indicator will flash then turn OFF.
8. Perform the SIR Diagnostic System Check if the
AIR BAG warning indicator does not operate as
described.
SIR Disabling and Enabling Zone 5
Disabling Procedure
1. Turn the steering wheel so that the vehicle’s
wheels are pointing straight ahead.
2. Turn the ignition switch to the OFF position.
3. Remove the key from the ignition switch.
4. Locate the body control module fuse center, then
remove the fuse center cover.
Important: With the AIR BAG fuse removed and the
ignition switch in the ON position, the AIR BAG
warning indicator illuminates. This is normal operation,
and does not indicate an SIR system malfunction.
5. Locate and remove the AIR BAG fuse from
the body control module fuse center.
6. Remove the right/passenger outer trim cover from
the I/P (3).
7. Remove the connector position assurance (CPA)
from the I/P module yellow connector (2).
8. Disconnect the I/P module yellow connector (1)
(4-way) from the vehicle harness yellow
connector (2).
893538
893538
816857
3-172 2003 Saturn Ion

Saturn 2003 Ion Specifications

General

Brand	Saturn
Model	2003 Ion
Category	Automobile
Language	English