Saturn 2003 Ion User Manual

SIR Disabling and Enabling Zone 3
Disabling Procedure
1. Turn the steering wheel so that the vehicle’s
wheels are pointing straight ahead.
2. Turn the ignition switch to the OFF position.
3. Remove the key from the ignition switch.
4. Locate the body control module fuse center then
remove the fuse center cover.
Important: With the AIR BAG fuse removed and the
ignition switch in the ON position, the AIR BAG
warning indicator illuminates. This is normal operation,
and does not indicate an SIR system malfunction.
5. Locate and remove the AIR BAG fuse from
the body control module fuse center.
6. Remove the left/driver outer trim cover from
the I/P.
7. Remove the connector position assurance (CPA)
from the steering wheel module coil yellow
connector (4–way).
8. Disconnect the steering wheel module coil yellow
connector from the vehicle harness yellow
connector.
Enabling Procedure
1. Remove the key from the ignition switch.
2. Connect the steering wheel module coil yellow
connector (4–way) to the vehicle harness yellow
connector.
3. Install the CPA to the steering wheel module coil
yellow connector.
4. Install the left outer trim cover to the I/P.
893538
877766
877766
2003 Saturn Ion 3-171
2003 Saturn Ion

Saturn 2003 Ion Specifications

General

Brand	Saturn
Model	2003 Ion
Category	Automobile
Language	English