Saturn 2003 Ion User Manual

Enabling Procedure
1. Remove the key from the ignition switch.
2. Connect the I/P module yellow connector (1) (4–
way) to the vehicle harness yellow connector (2).
3. Install the CPA to the I/P module yellow
connector (2).
4. Install the right outer trim cover to the I/P (3).
5. Install the AIR BAG fuse into the body control
module fuse center.
6. Install the body control module fuse center cover.
7. Use caution while reaching in and turn the
ignition switch to the ON position.
The AIR BAG indicator will flash then turn OFF.
8. Perform the SIR Diagnostic System Check if the
AIR BAG warning indicator does not operate as
described.
SIR Disabling and Enabling
Zone 6 (Coupe)
Disabling Procedure
1. Turn the steering wheel so that the vehicle’s
wheels are pointing straight ahead.
2. Turn the ignition switch to the OFF position.
3. Remove the key from the ignition switch.
4. Locate the body control module fuse center, then
remove the fuse center cover.
816857
893538
893538
2003 Saturn Ion 3-173
2003 Saturn Ion

Saturn 2003 Ion Specifications

General

Brand	Saturn
Model	2003 Ion
Category	Automobile
Language	English