Saturn 2003 Ion User Manual

SIR Disabling and Enabling
Zone 2 (Coupe)
Disabling Procedure
1. Turn the steering wheel so that the vehicle’s
wheels are pointing straight ahead.
2. Turn the ignition switch to the OFF position.
3. Remove the key from the ignition switch.
4. Locate the body control module fuse center then
remove fuse center cover.
Important: With the AIR BAG fuse removed and the
ignition switch in the ON position, the AIR BAG
warning indicator illuminates. This is normal operation,
and does not indicate an SIR system malfunction.
5. Locate and remove the AIR BAG fuse from
the body control module fuse center.
6. Remove the coat hooks.
7. Remove the trim panel from the high mount stop
lamp by pulling at the clip locations.
8. Gently pull back on the headliner to access the
left pretensioner connector.
9. Remove the connector position assurance (CPA)
from the left/driver pretensioner.
10. Disconnect the left pretensioner connector.
893538
899819
2003 Saturn Ion 3-167
2003 Saturn Ion

Saturn 2003 Ion Specifications

General

Brand	Saturn
Model	2003 Ion
Category	Automobile
Language	English