Saturn 2003 Ion User Manual

Enabling Procedure
1. Remove the key from the ignition switch.
2. Connect the left roof rail module yellow connector
to the vehicle harness yellow connector.
3. Install the connector position assurance (CPA) to
the left/driver roof rail module connector.
4. Install garnish molding to the upper lock pillar.
5. Connect the left pretensioner and install the
connector position assurance (CPA).
6. Install the lower center pillar.
7. Install the AIR BAG fuse into the body control
module fuse center.
8. Install the body control module fuse center cover.
9. Use caution while reaching in and turn the
ignition switch to the ON position.
The AIR BAG indicator will flash then turn OFF.
10. Perform the SIR Diagnostic System Check if the
AIR BAG warning indicator does not operate as
described.
899820
899818
893538
3-170 2003 Saturn Ion

Saturn 2003 Ion Specifications

General

Brand	Saturn
Model	2003 Ion
Category	Automobile
Language	English