Saturn 2003 Ion User Manual

Important: With the AIR BAG fuse removed and the
ignition switch in the ON position, the AIR BAG
warning indicator illuminates. This is normal operation,
and does not indicate an SIR system malfunction.
5. Locate and remove the AIR BAG fuse from
the body control module fuse center.
6. Remove the lower center pillar.
7. Remove the connector position assurance (CPA)
from the pretensioner.
8. Disconnect the right pretensioner yellow connector
from the vehicle harness connector.
9. Remove the garnish molding from the upper
lock pillar.
10. Remove the connector position assurance (CPA)
from the right/passenger roof rail module
connector.
11. Disconnect the right roof rail module yellow
connector from the vehicle harness yellow
connector.
Enabling Procedure
1. Remove the key from the ignition switch.
2. Connect the right roof rail module yellow connector
to the vehicle harness yellow connector.
3. Install the CPA to the right roof rail module
connector.
4. Install the garnish molding to the upper lock pillar.
899818
899820
899820
3-176 2003 Saturn Ion

Saturn 2003 Ion Specifications

General

Brand	Saturn
Model	2003 Ion
Category	Automobile
Language	English