Saturn 2003 Ion User Manual

Enabling Procedure
1. Remove the key from the ignition switch.
2. Connect the steering wheel module coil yellow
connector to the vehicle harness yellow connector.
3. Install the CPA to the steering wheel module coil
yellow connector.
4. Install the driver/left outer trim cover to the
instrument panel (I/P).
5. Gently pull back on the headliner and connect the
left/driver pretensioner connector.
6. Install the connector position assurance (CPA) to
the left/driver connector.
7. Connect the left/driver roof rail module yellow
connector to the vehicle harness yellow connector.
8. Install the CPA to the left roof rail module yellow
connector.
9. Install the left outer trim cover.
877766
899819
899820
3-180 2003 Saturn Ion

Saturn 2003 Ion Specifications

General

Brand	Saturn
Model	2003 Ion
Category	Automobile
Language	English