Saturn 2003 Ion User Manual

Important: Note the number and location of the
factory welds for installation of the dash panel.
6. Locate and drill out all the necessary
factory welds.
7. Remove the dash panel.
Installation Procedure
Important: The service part comes as an assembly
that includes the plenum lower panel. If the repair does
not require the plenum, remove the plenum before
you install the dash panel.
Important: If the location of the original plug weld
holes can not be determined, space the plug
weld holes every 40 mm (1
1
⁄ 2 in) apart.
1. Drill 8 mm (5/16 in) plug weld holes in the service
part as necessary in the corresponding locations
noted on the original panel.
870810
870809
865505
2003 Saturn Ion 3-49
2003 Saturn Ion

Saturn 2003 Ion Specifications

General

Brand	Saturn
Model	2003 Ion
Category	Automobile
Language	English