Savant PAV-VIMAP8S - Adding a Video Output IP Receiver to a Configuration

Savant IP Video with Audio Processing Deployment Guide
Copyright © 2018 Savant System, LLC
009-1621-01 | 181107
16 of 32
6.3 Adding a Video Output IP Receiver to a Configuration
This process can be used for any of the Video over IP output device. In an open Blueprint configuration do the following.
1. Click Show Library.
2. Click the All Manufacturers.
3. Select Savant.
4. In the Search bar type VOM.
5. Select the Video Output IP Receiver that is needed and drag it into
the User zone that is will be used.
6. Name the Device.
7. Place the Video IP Transmitter in the layout window.
8. Select the Video Input IP Transmitter.
9. Open Inspector.
10. Enter the UID.