SCADAmetrics EtherMeter - Interface Setup Commands (Continued)

46
SET LCD07
ON, OFF
CONTROLS LCD DISPLAY OF ANALOG INPUT #2.
ON:
DISPLAY ACTIVE.
OFF:
SUPPRESSES DISPLAY.
OFF
SET LCD08
ON, OFF
CONTROLS LCD DISPLAY OF AUX DIGITAL I/O #1.
ON:
DISPLAY ACTIVE.
OFF:
SUPPRESSES DISPLAY.
OFF
SET LCD09
ON, OFF
CONTROLS LCD DISPLAY OF AUX DIGITAL I/O #2.
ON:
DISPLAY ACTIVE.
OFF:
SUPPRESSES DISPLAY.
OFF
SET LCD10
ON, OFF
CONTROLS LCD DISPLAY OF ACTIVE SERIAL PROTOCOL.
ON:
DISPLAY ACTIVE.
OFF:
SUPPRESSES DISPLAY.
OFF
SET LCD11
ON, OFF
CONTROLS LCD DISPLAY OF DEVICE (SERIAL) ADDRESS.
ON:
DISPLAY ACTIVE.
OFF:
SUPPRESSES DISPLAY.
OFF
SET LCD12
ON, OFF
CONTROLS LCD DISPLAY OF DEVICE UPTIME (MINUTES).
ON:
DISPLAY ACTIVE.
OFF:
SUPPRESSES DISPLAY.
OFF
SET LCD13
ON, OFF
CONTROLS LCD DISPLAY OF FIRMWARE VERSION.
ON:
DISPLAY ACTIVE.
OFF:
SUPPRESSES DISPLAY.
OFF
SET LCD14
AUTO, ON, OFF
CONTROLS LCD DISPLAY OF BANNER TEXT.
AUTO:
DISPLAYS WHEN BANNER TEXT EXISTS (WHEN BANNER TEXT HAS
BEEN ENTERED BY THE USER).
ON:
DISPLAY ACTIVE.
OFF:
SUPPRESSES DISPLAY.
AUTO