14
© 2021 Scan Electronics Ltd.
Standalone usage
The menu is organized cyclically at all levels. For example, pressing the swing button "down" on the top
level of menu moves the focus from item to item in the following order: --> --> --> --> -->
--> --> etc...
General structure of the menu is shown below.
[Settings] – transition to device settings submenu .
·
[Display units] – choice between presentation of dose rate and count rate for Monitor mode (see
also Display units).
·
[Measurement units] – transition to submenu.
– [Dose] – selection of the units: [Sv (Sievert)] / [R (Roentgen)]
– [Count rate] – selection of the units: [CPS (counts per second)] / [CPM (counts per minute)]
– [< Back] – return to a higher level, presented in all submenus;
– [<< Menu quit] – return to selected display mode, presented in all submenus;
* further, the last two points [< Back] and [<< Menu quit] are designated as [< <<]
·
[Dose rate] – transition to submenu.
– [Alarm 1] – setting alarm threshold 1 for the dose rate;
– [Alarm 2] – setting alarm threshold 2 for the dose rate;
– [< <<];
·
[Dose] – transition to submenu.
– [Alarm 1] – setting alarm threshold 1 for the accumulated dose;
– [Alarm 2] – setting alarm threshold 2 for the accumulated dose;
– [< <<];
·
[Screen] – transition to submenu.
– [Backlight] – transition to submenu;
– – [Turning on] - backlight turninig-on mode: [Auto] / [Never] / [By button];
– – [Duration] - backlight turninig-off timeout: [5 s], [10 s], [15 s], [30 s]
– – [Brightness] - backlight brightness level: from [0] to [9]
– – [< <<];
– [Rotate] – image orientation mode: [Auto] / [Right] / [Left];
– [< <<];
·
[Signals] – transition to submenu.
– [Sound] – selection [On] / [Off], for all sounds
– [Vibro] – selection [On] / [Off], for all vibration signals
– [Light] – selection [On] / [Off], light flash for a radiation quantum registration, separately
– [Clicks] – selection [On] / [Off], sound for a radiation quantum registration, separately
– [Buttons] – transition to submenu
– – [Sound] – selection [On] / [Off], sound for pressing the buttons, separately
– – [Vibro] – selection [On] / [Off], vibration for pressing the buttons, separately
– – [< <<];
– [Alarms] – transition to submenu.
– – [Dose rate] – transition to submenu.
– – – [Alarm 1] – transition to submenu.
– – – – [Sound] – selection [On] / [Off]
– – – – [Vibro] – selection [On] / [Off]
– – – – [< <<];
– – – [Alarm 2] – transition to submenu.
– – – – [Sound] – selection [On] / [Off]
– – – – [Vibro] – selection [On] / [Off]
– – – – [< <<];
– – – [Out of scale] – transition to submenu.
– – – – [Sound] – selection [On] / [Off]
– – – – [Vibro] – selection [On] / [Off]
– – – – [< <<];
– – [Dose] – transition to submenu.
– – – [Alarm 1] – transition to submenu.
– – – – [Sound] – selection [On] / [Off]
– – – – [Vibro] – selection [On] / [Off]
To Next Page
Loading...
Need help?
General