To Next Page

To Previous Page

Standalone usage

select the [Alarm1], [Alarm2] or [Out of scale] item by short pressing

the "up" and "down" swing buttons;

enter the submenu by short pressing the round button.

Next steps are identical for [Alarm1], [Alarm2] and [Out of scale] settings:

to change the sound permission (while in the [Alarm1], [Alarm2] or [Out of scale]):

select [Sound] item by short pressing the

swing buttons;

select [On] or [Off] variant, according to the

desired action, by short pressing the round

button.

to change the vibration permission (while in the [Alarm1], [Alarm2] or [Out of scale]):

select [Vibro] item by short pressing the swing

buttons;

select [On] or [Off] variant, according to the

desired action, by short pressing the round

button.

To return to the higher level or quit the menu, set focus on the [<Back] or [<< Menu quit] item

respectively and confirm your choice by short pressing the round button.

3.8.7 Bluetooth

Use [Bluetooth] item of Settings to turn on and off the Bluetooth interface on dosimeter:

while in the Settings, set focus on the

[Bluetooth] item by short pressing the "up"

and "down" swing buttons;

select [On] or [Off] variant, according to the

desired action, by short pressing the round

button.

If required, go to next items of Settings by short pressing the "up" and "down" swing buttons.

To return to the top level or quit the menu, set

focus on the [<Back] or [<< Menu quit] item

respectively and confirm your choice by short

pressing the round button.

Scan-Electronics RadiaCode-101 User Manual

Questions and Answers: