Scania DC12 - Maintenance Schedule

© Scania CV 2009 31
Maintenance schedule
1. More often if required.
2. Earlier if the vacuum indicator shows red.
3. If inhibitor has not been topped up for five years, the coolant should be changed.
Daily
First
time at
Interval At least
First start 400 h 200 h 400 h 1,200 h 2,400 h 4,800 h Annually Every 5 years
Lubricating oil system, page 28
1. Checking the oil level
zz
2. Oil change
z1 z
3. Cleaning the lubricating oil cleaner.
z1 z
4. Renewing the oil filter
z1 z
Cooling system, page 32
5. Checking the coolant level
z
6. Checking the coolant
zz3 z
7. Cleaning the cooling system
z1 z
Air cleaner, page 38
8. Test reading of vacuum indicator
z
9. Cleaning the coarse cleaner
z1 z
10. Cleaning or renewing the filter element
z2 z
11. Renewing the safety cartridge
zz
Fuel system, page 40
12. Checking the fuel level
zz
13. Changing the main filter and water separating filter
z1 z
Electrical system, page 42
14. Checking the electrolyte level in batteries
zz z
15. Checking the state of charge in batteries
zzz
16. Cleaning the batteries
zz
17. Checking the coolant level monitor
zz
Miscellaneous, page 44
18. Checking the drive belt
zzz
19. Check for leaks, rectify as necessary
z
20. Checking and adjusting valve clearances
zz
21. Checking and adjusting the unit injector rocker arms
zz
22. Renewing (or cleaning) the closed crankcase ventilation
valve
z