www.schaerer.com Programming
52 / 68
Operating instructions / V07 / 06.2010
Overview: product programming (milk foam, hot water)
Accessing the programming level:
Ready
► Press to access the programming level.
Product, 2x, C
Siena 2: Product programming: milk foam ► Press button [ 4 ]
+ 0% #.## s
► Set the milk foam volume (sec.) using or .
► Conrm by pressing
.
Ready
End of milk foam programming.
Siena 2: Product programming: hot water ► Press
+ 0% #.## s
► Set the water volume (sec.) using or .
► Conrm by pressing
.
Ready
End of hot water programming.