www.schaerer.comCleaning
Operating instructions / V07 / 06.2010
57 / 68
3a
► Put the milk tube into a container with fresh
water (± 150 ml).
► Place a container (Volume: ± 200 ml) under
the outlet.
► Press the button twice.
Milk system rinsing:
(Siena 2)
• Never top up milk! Always throw leftovers away.
• Use milk from its original packing!
• Always clean the milk container before lling it with fresh milk.
• Fill up with fresh milk, chilled to 3 °C - 5 °C, just before restarting the machine!
• The milk must be homogonised! Use pasteurized or ultra high temperature treated (UHT) milk! Do not use raw milk!
• For optimum hygiene use a refrigerator (optional) to maintain milk temperature.
• Clean the refrigerator/cooling element (optional) at least once a week if the machine is equipped with one!
Observe all hygiene regulations according to HACCP!
Extract from HACCP:
4a 4b
► Press the button to enter the Stand-by
mode.
► Open the service door at the side.
► Pull out the drawer (Press „Press“) and lift out
the brewer.
► Clean the brewer under warm running water.
► Remove and clean the plastic tray.
► Remove the coffee grounds in the brewer area
using a vacuum cleaner or the brush.
► Re-place the plastic tray and the brewer.
► Press the
button to switch-on the ma-
chine.
Siena 1:
► Brewer cleaning is nished.
Weekly cleaning:
(Siena 1 / Siena 2)
Never clean brewer in the dish
washer! The brewer has to be dry
before it is placed back in!
4c
Siena 2:
► Clean the foam nozzle (see picture) with the
supplied instrument (Art.-No.: 061454)
If the function indicator
is blinking
the brewer is not right in place or the
door is not closed properly.
2
3
4
2b2a
► Insert the cleaning tablet into the funnel.
► Press the
button.
► Fill the water tank with fresh water.
► Empty the drip tray and place a container (Vo-
lume: ± 1.5 Litre) under the outlet.
► If „Tablet“ already appears on the display
don‘t press the button! Otherwise
press the
button for 4 seconds, until
following message displays:
Tablet
Coffee system cleaning:
(Siena 1 / Siena 2)
Wait until the display shows:
Ready
Wait until the display shows:
Ready
Cleaning programme is running!
(duration: ± 5 minutes)
Milk system rinsing is running!
(duration: ± 40 seconds)
To Next Page
Loading...
Need help?
General
