www.schaerer.comCleaning
Operating instructions / V07 / 06.2010
59 / 68
Cleaning the milk nozzle (Siena 2)
Installing/detaching the foam head (Siena 2)
► Press the front of the foam head [ 1 ].
► Remove the foam head by pulling it downwards [ 2 ].
► Remove the milk tube and tube connector.
► Swing the foam chamber (with outlet pipe) away from the outlet beaker [ 3 ].
► Remove the foam chamber by pulling it upwards [ 4 ].
► Unscrew and remove the outlet pipe [ 5 ].
► Clean all parts under running water.
► Re-attach the parts in reverse order.
► Insert a brush into the milk nozzle.
1
2
3
5
4
7
► Reinstall the outlet.
► Descaling process is nished. On the dis-
play appears:
<< Stand by >>
When the descaling is nished, a prompt to carry out the daily
cleaning appears automatically.