EC Declaration of Conformity
According to the EC Machinery Directive 2006/42/EC
Annex II A
We hereby declare that the design of the machine described below and the version we have placed
on the market fulfils the essential health and safety requirements of EC Machinery Directive
2006/42/EC.
Manufacturer: SCHALLER AUTOMATION
Industrielle Automationstechnik GmbH & Co. KG
Industriering 14
D-66440 Blieskastel, Germany
Type of device: Oil mist detector (OMD)
Type designation: VISATRON
®
VN2020 EX
Intended use: Detection and display of oil mist in large engines
Serial number: 1219028000
Year of construction: 2019
Marking:
We declare the product complies with further Directives applicable to the product, as follows:
• EMC Directive 2014/30/EU
• ATEX Directive 2014/34/EU
Applied harmonised standards:
• EN ISO 12100:2010-11
• EN ISO 4414:2010-11
• EN 60529:2014-09
• EN 61000-6-1:2019-11
• EN 61000-6-2:2019-11
• EN 61000-6-3:2011-09
• EN 61000-6-4: 2011-09
• EN IEC 60079-0:2019-09
• EN 60079-28:2016-04
Applied national standards and technical specifications:
• IACS UR M10: Rev.4 2013
• IACS UR M67: Rev.2 2015
• IEC 60079-0 (2017) and IEC 60079-28 (2015)
This EC declaration of conformity shall no longer be valid if:
• the machine is rebuilt, modified or used for purposes other than those for which it is intended
without our written consent;
• the instructions in the operating manual are not followed.
D-66440 Blieskastel, Germany 2019-12-19
Stephan Schaller
(Managing Director)
To Next Page
Loading...
Need help?
General
