Installing the filling pump with filling pipe on the pipe siphon
Start by filling the filling pump (1) with 70 ml of lubrication oil approved by the
engine manufacturer/engine's own lubrication oil.
Insert the filling adapter (3) into the straight screw-in socket L10 (2) as far as it
will go.
Fill the pipe siphon via the straight screw-in socket L10 (2) with 70 ml of
lubrication oil (lubrication oil approved by the engine manufacturer/engine's
own lubrication oil).
The screw-in socket (2) has to be completely closed by the filling adapter (3).
Excess oil can flow into the crankcase.
To Next Page
Loading...
Need help?
General
