Schenker SMART 100 User Manual

6 – MAINTENANCE (ROUTINE AND EXTRAORDINARY) COD.100S12/24.D.2018
EN
THE PRESENT MANUAL BELONGS TO - Schenker Italia - ALL RIGHTS RESERVED
44
6.5.2 Shutdown operating procedure
1. Disconnect the production pipe and collect about
20 liters of fresh water within a tank.
2. Switch off the system by pushing the stop button.
3. Prepare the solution carefully mixing the bottle of
SC1 in about 20 liters of unchlorinated water.
4. Connect the 3 hoses to the pre-pump and
watermaker as indicated above, and dip them in
the solution.

Schenker SMART 100 Specifications

General

Brand	Schenker
Model	SMART 100
Category	Water Filtration Systems
Language	English