3 – PRODUCT PRESENTATION COD.30S12/24.A.2018
THE PRESENT MANUAL BELONGS TO - Schenker Italia - ALL RIGHTS RESERVED
11
3.4 Attached documents
The packaging contains the technical documentation (use and maintenance manual, electric and hydraulic
scheme, warnings and instructions).
ATTENTION
• Lift the system only using the aluminium
structure and not trough the Inox SS fittings.
• Read carefully the use and maintenance
manual before installing the system.
• Use only recommended material for the
installation (especially pipes, fittings and
seals) in accordance with the present
manual.
• Do not stock the unit under temperature of
5°.
DOCUMENTS INCLUDED IN THE PACKAGING
FIG. 3-3
3.5 Technical data
NOTE:
The following technical data refers to the watermaker Smart 30 12/24V Analog version
WATERMAKER GROUP
Dimensions
Length: 68 cm
Width: 24 cm
Hight: 24 cm
Weight: 18 Kg
Hydraulic Connection
Seawater inlet: ¾’’ fitting, 16mm internal diameter rinforced hose.
Exhaust: ½’’ fitting, 16mm internal diameter rinforced hose.
Fresh water: ¼’’ fitting, 6x8mm hose.
PUMP GROUP
Dimensions
Length: 34 cm
Width: 20 cm
Hight: 20 cm
Weight: 7 Kg
To Next Page
Loading...
